The SW215A subwoofer is designed to deliver high quality low frequency reproduction where very high output is a key requirement, together with well defined deep bass response and fast transient response. Its compact size and light weight make it suitable for several different uses, ranging from touring applications to fixed installations and high-level dance clubs.The SW215A is a very high quality powered subwoofer system featuring some of the most advanced technologies for low frequency reproduction. Its unique and innovative design is based on a configuration that can be defined as Manifolded Band Pass. It uses manifolding of the front side of the cones to maximize the mutual coupling between the two drivers. This innovative configuration does not use any large resonant cavity to load the speaker, but very compact cavities in order to obtain advantages in terms of definition, both at the lowest end and the upper bass.
| SYSTEM | |
| System’s Acoustic Principle | Manifolded Band Pass |
| Frequency Response (±3dB) | 39 Hz – 100 Hz (Processed) |
| Maximum Peak SPL @ 1m | 139 dB |
| TRANSDUCERS | |
| Type | Two 15” (380mm), 3” (75mm) VC |
| Cone | High stiffness, water repellent |
| Voice Coil Type | Flux Demodulating Ring |
| Suspension | Double Centering Spider |
| ELECTRICAL | |
| Input Impedance | 20 kΩ balanced, 10 kΩ unbalanced |
| Input Sensitivity | +4dBu / 1.25 V |
| Signal Processing | CORE processing, 96kHz / 40bit floating point SHARC DSP, 24 bit AD/DA converters |
| Direct access Controls | 4 Presets (Standard/InfraSub/Cardioid/ User), Network Termination, GND Link |
| Remote Controls | PRONET control software |
| Network protocol | CANBUS |
| Amplifier Type | Class D with SMPS, Variable Switching Frequency |
| Output Power | 1000W + 1000W |
| Mains Voltage Range (Vac) | 230V ±15% - 115 ±15% 50/60Hz (internally selectable) |
| IN / OUT Connectors | Neutrik XLR-M / XLR-F |
| IN / OUT Network Connectors | ETHERCON®(NE8FAV) |
| Mains Connector | PowerCon® (NAC3MPA) |
| Cooling | Variable speed DC fan |
| ENCLOSURE & CONSTRUCTION | |
| Physical Dimensions | |
| Width | 571 mm (22.48”) |
| Height | 800 mm (31.50”) |
| Depth | 582 mm (22.91”) |
| Depth Including Wheels | 710 mm (27.95”) |
| Enclosure Material | 15mm, reinforced phenolic birch |
| Paint | High resistance, water based paint |
| Suspension system (SW215AF) | |
| Side Suspension | High Strength Steel with ¼ Fast Pin |
| Back Suspension | High Strength Steel with ¼ Fast Pin |
| Wheels | 4 heavy-load 100 mm ø |
| Net Weight | SW215A: 64.5 Kg (142.20 lbs.) - SW215AF: 68.5 Kg (151 lbs.) |
